View single post by ident | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Posted: Saturday Apr 5th, 2014 02:05 pm |
|
|||||||||
ident
|
Physical Inputs to Cbus This allows a Comfort Input to send its status to a C-Bus lighting Group address For each Comfort Input or Zone, assign a Lighting Group address as shown above Any change in the Input will send the state to the mapped lighting group This allows cbus switches to see the state of the mapped input. It is extremely useful when C-Bus controls airconditioning, lighting or other equipment on Comfort where the status is monitored by Current sensors or relay contacts The same Lighting group addresses may also be mapped to Comfort Output Pulse, Output toggle or Counters in the Lighting Application table Note that Virtual Inputs should not be mapped to Group addresses in this table (as Virtual Inputs are not physical)
|
|||||||||
|