ident
Joined: | Wednesday Aug 9th, 2006 |
Location: | Singapore |
Posts: | 3493 |
Status: |
Offline
|
back to top
|
The "phantom Keypad" is produced by the following conditions
- The cclx file had a keypad eg KP04 in the modules tab say at ID 1
- Scanning of modules detects that there is a different keypad at the same ID say KT03
- The KP04 that was not found is not deleted from the configuration. Instead it is moved to the last (unused) ID and marked in Red as "Not found". you can now delete it manually. The reason for this is that some modules have programmed data like KT03, UCM/KNX etc with data. If the module was temporarily removed for testing, we do not want to delete the programed data, so the module is not deleted automatically.
For Firmware upgrade, right click on the module should show the firmware upgrade options
Transfer > Firmware Upgrades is for firmware upgrade by programmng cable for firmware < version 6
|