Comfigurator 3.7.5 (still Beta) is available for download. Please read the Known Bugs list. The first item is very important - please write to Comfort before reading from Comfort so as to avoid an exception
Customers are encouraged to upgrade to 3.7.5 even though it is beta, provided that they take note of the Known Bugs listed below
Known Bugs- Reading from Comfort will cause an exception if a write to Comfort has not been done. Workaround is to Write to Comfort first for each system.
- Blinds function is not correct
- Thermostat function selective write does not write the parameters and does not write the correct parameters to locations
- The new action "If Last Security Mode" has only "Security Off"and cannot select other security modes in the condition
- GSM4 - Get status interrupts Firmware Upgrade for GSM4 and causes it to fail repeatedly. The workaround is to log out and do the upgrade before logging in so Set Status is not on during the upgrade
- Links to manuals are not complete
- Selective Write does not select Control Menu when Responses change which are assigned to the Control Menu. To workaround, please use Full WRITE. This may be a bug from older versions
The changes are- Help link to Comfort Forums
- Help test for Security > Status Outputs is improved
- Supports new UCM/GSM4
- Supports UCM/Zwave3
- Link to Manuals for each products
New Actions - Action 42 - Keypad button causes Family Care Alarm Dialout
- Action 43 - Clear Event Log
- Action 184 - Branch if = 2 byte signed constant
- Action 185 - Banch if <> 2 byte signed constant
- Action 186 - Branch if >= 2 byte signed constant
- Action 187 - Branch if < 2 byte signed constant
- Action 188,0 - Exit if = 2 byte signed constant
- Action 188,1 - Exit if <> 2 byte signed constant
- Action 188,2 - Exit if >= 2 byte signed constant
- Action 188,3 - Exit if < 2 byte signed constant
- Action 73, 30 - Get Last Security Mode before disarmed
- Action 73,31 - Get GSM Network Strength
- Action 155 - Send SMS Custom Message (GSM4)
Control Menu Alternate Text
In Control Menu, Alternate Phrase can be entered. This can be used for the iPhone/Android/ iPad apps in future
Phone Permissions (GSM)
Phone permissions added for each Phone in Security > Phone Numbers. "Allow SMS Arm", "Allow SMS Disarm", Allow SMS Control". This determines if each phone is allowed to do the selected action by SMS
Functions
New Functions category in Comfigurator left Pane. Functions implemented are Blinds and Thermostats (for testing only)
Bugs Fixed- Some PCs had UCM connection if USB wrongly set to Via KT03 even though KT03 is not present and the Voa KT03 box is not seen.
- For KT03, write to KT03 by direct USB connection fails with error popup "Failed to Connect to KT03".
- If KT03 configuration is erased (eg due to incomplete write) Reading from KT03 will cause an Exception
- If a Zone Type which has no Normal Alarm Type (eg Zone Type 30 Digital NO) is assigned to an alarm type, then it causes all zones to be assigned to the changed zone Type
- If there are 2 UCMs connected to Comfort which have correct ID but Comfort is configured for 1 UCMs, and the cclx template has default 1 UCM, Scanning for All modules will show the 2nd UCM as "Not Polled" which is correct. However scanning for All Modules will not work - no scan is done. However scanning for UCMs only in this case works.
- KT03 schedules - If Days of the week are checked the file saved and reopened, the days of week become unchecked. This is a problem with older versions as well
Last edited on Sunday Sep 29th, 2013 07:44 am by slychiu
|