View single post by gaynorc | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Posted: Thursday May 16th, 2013 10:02 pm |
|
||||||||||||
gaynorc
|
I upgraded firmware 6.020 to 7.027 today. Subsequently after arming the system to away mode, and then disarming the system, I encountered a problem with a response which had previously been working fine. On entry to the house while in "away mode" a zone response (the entry route) switches an output to "flash" (connected to a buzzer). When the system is disarmed, the Miscellaneous Event "Security Off Response" has a response which switches that output to "off". That worked with 6.020. With 7.027 the output remains in "flash" and is not switched off. As a temporary work around I have included in the Miscellaneous Event "Security Off Response" response an "all outputs off", and that silences the buzzer. Obviously this is not a solution. I wonder has this something to do with the new feature "Output command ON or OFF is ignored if the output state is unchanged" when the command has previousy been "Flash"?
|
||||||||||||
|