View single post by sppooky

Posted: Tuesday May 7th, 2013 11:10 pm

Joined:	Friday Dec 21st, 2012
Location:
Posts:	11
Status:	Offline

Hi I have got 4 internal pir sensors and no door contacts. The pir in downstairs passage is next to the keypad. This sensor is set as PIRnightAway with Entry Path set to yes. Both entry time and exit time is set to 30 seconds and entry warning time is set to 5 seconds. Away arming method is set to 'after exit delay'.

my problem is that I can arm the alarm ok, but when I enter the house and the Downstairs PIR detects me the outside bellbox siren alarm goes off, as well as keypad alarm. There is no 30 second entry time or entry warning time delay. The siren goes off the instant I enter the house, giving me no time to disarm alarm from keypad.

note I have no entry door sensor installed which is why I have set away arming to arm after exit delay. Also all downstairs pirs are set as PIRnightAway but only the passage one has entry path set to yes.

I know under the zone type PIRNightaway, the 'away' setting is set to immediate. Is this what I need to change? But shouldn't the entry time of 30 seconds take precedence over this?

Close Window