View single post by ident | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Posted: Friday Nov 23rd, 2012 11:03 am |
|
|||||||||
ident
|
Firmware Upgrades Firmware Upgrades can now be done by checking for updates over the Internet (applies to modules with firmware version 6 and above) This is done in the Modules Tab. Right click on the desired module Select "Check for Firmware Updates" If the firmware of the module is lower than the current firmware on the Cytech server, the firmware wil be upgraded. After confirmation that the firmware should be upgraded, the progress bar will be seen The Firmware can also be upgraded from a local file if you have already downloaded the cbf file from the Cytech Server at http://www.cytech.biz/firmware.html To do this, select "Upgrade Firmware from Local File" after right clicking on the module as shown in the first screenshot above. Then browse to the location of the file Unlike the previous Comfigurator versions, you do not have to specify Nwhether the firmware upgrade is "By Direct Connection to PC" or by "Comfort Bus" Comfigurator will know what method to use. In Comfigurator 3.6.0, Transfer > Upgrade, the only option is Upgrade Firmware by Programming Cable The other options "By Direct Connection" and "By Comfort Bus" have been removed as they are replaced by the new method of right clicking on the module This topic will be closed as it is already very long Please open a new topic for all your comments, feedback, problems and questions Last edited on Friday Nov 23rd, 2012 11:06 am by ident |
|||||||||
|