View single post by ident

Posted: Sunday Sep 9th, 2012 05:00 am

Joined:	Wednesday Aug 9th, 2006
Location:	Singapore
Posts:	3493
Status:	Offline

An Application Note showing how to control the LightwaveRF devices using the Universal UCM with ETH02 can be downloaded from http://www.cytech.biz/lightwaverf_interface_application_note.html?category_id=124

The example cclx file is also available

The Interface requires the wifi-Link used for Iphone/ipad control

One way control from Comfort to LightwaveRF is possible using the UCM/Universal + ETH02

The Universal UCM allows interfacing of almost any 3rd party home automation system with Comfort. This can be ordered with a RS232, RS485 (Isolated) , or Ethernet interface depending on the device to be connected.
The Universal UCM with ETH03 interface is required for LightwaveRF

The Universal UCM can be programmed for baud rate, parity, checksum and other parameters to match that of the 3rd party device. It has a user interface which allows any command to be sent to the device. Commands or messages can also be received from the other device and mapped to Comfort Registers like Counters, Sensors, Keypad keys and Virtual Inputs. However the LightwaveRF product is only one way, ie it accepts commands but does not send status

Universal UCM Interface on the Cytech website
http://www.cytech.biz/universal_ucm_interface.html?category_id=74

Last edited on Wednesday Jan 13th, 2016 03:02 am by

Close Window