View single post by ident | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Posted: Sunday Jun 17th, 2012 03:11 am |
|
||||||||||||
ident
|
Monitoring Dupline Status The state of Counters can be heard on the Home Control Menu. In the above example, each Control Key can be assigned to a specific Counter. E.g. Master Bedroom controls Dupline address B1, which is mapped to Counter 9. Hence assigning Feedback Type as Counter and Counter as 9 means the feedback status is obtained from counter 9. This means that when Dupline Output B1 is On, the Home Control menu for Master Bedroom will announce its status as “On†and when Output B1 is Off the master Bedroom will announce its status as “Offâ€. Note that Sending commands to Dupline addresses will also update the mapped Comfort to Dupline Interface Counters Feedback Types on the Home Control menu can be configured as Inputs, Outputs, Counters, Sensors, or Flags.
|
||||||||||||
|