View single post by ident | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Posted: Sunday Jun 17th, 2012 02:44 am |
|
||||||||||||
ident
|
Use Comfigurator to Scan for UCMs The UCM/Dupline willl be discovered and shown in the list You will be able to create Responses to send commands to Dupline using the Response Wizard Select “Add Response†to create a new Response, or “Response Wizard†to edit the selected Response. To Add a new Response, enter the Response Description in the pop-up window and press ENTER. The Name will be automatically generated as shown A new window opens. Select UCM and SmartHouse/Dupline A dropdown list will show Input, Momentary Input, and Output For Input, select a Dupline Address A1 to A8, B1, to B8,.... until P1 to P1 (128 Addresses) Select Action On or OFF This is equivalent to Pressing a switch on Dupline Momentary switch means the Dupline switch is pressed and released Select a Dupline Input. The effect on the Dupline is the same as pressing and releasing the switch. It depends on how the Dupline system is programmed. Finally selecting Outputs and the Output address A1 to P8 and ON or OFF will force the Dupline Output on or off
|
||||||||||||
|