+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Support (https://www.comfortforums.com/forum-2.html)
+--- Forum: Problems & Troubleshooting (https://www.comfortforums.com/forum-36.html)
+---- Forum: Keypad (https://www.comfortforums.com/forum-69.html)
+---- Thread: KP02 entry warning beeps. (/thread-3063.html)
- sinky100 - 09-08-2012
Have a Comfort System utlising: Panel (8001/E); RGR03; KP02; KP03-WI; DP01.
Not sure whether this is coincidental, but recently (after adding KP03?) my keypad KP02, has stopped beeping when I enter the house, and system is armed.
Any ideas as to why? Not a huge issue, but if I arm the system before I go out and one of the family returns before me, the inevitable alarm sounds before they realised the system was armed.
Any help is greatly appreciated,
Iain
- ident - 09-09-2012
Check that the IDs of the KP02 and KP03 are different, and the Number of Keypads in Comfort is 2
Is the volume control of the KP02 turned all the way down? This has been the cause of several issues regarding no keypad voice
Does the keypad have other tones, eg Trouble tones when you disconnect the telephone line
Try writing the configuratuon again to Comfort
- sinky100 - 09-09-2012
Thanks for the reply ident. I\'ll check as suggested.
However, the beeps are present on exit and the voice \"please exit\" is loud enough.
Iain