+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Support (https://www.comfortforums.com/forum-2.html)
+--- Forum: Firmware History (https://www.comfortforums.com/forum-60.html)
+---- Forum: Comfort Firmware (https://www.comfortforums.com/forum-79.html)
+---- Thread: ULTRA Firmware 6.009, to 6.011 Beta (/thread-2637.html)
- ident - 12-10-2011
ULT 6.009 Beta version is available for testing
This firmware is not released yet. It is still going through intensive testing at Cytech. However users who would like to test the fixes and new features are welcome to try this new version. Installers should not install this firmware on users systems yet
Changes from 6.006
Bug Fixes
- Fixed BUG from 6.006 Cbus and KNX arm buttons cannot work.
- Fix bug where event log is heard on the phone, the events are also displayed on all keypads
- When keypad disarms after alarm, the Alarm History is not played automatically. Removed because this confuses some people. System now says \"Security Off\" and \"Thank you goodbye\". However when sign in to user menu without disarming the system (ie press * followed by code and #), the alarm history is still heard.
- Initial date and time is changed to 07/12/2011 (when Comfort is turned on for the first time)
- Maximum Do Action Rs485 commands increased from 48 to 64 eg DA commands
- RS485 receive buffer size increased from 127 to 240
- In Event Log, changed user number assignments - Engineer Code changed from 18 to 254, Keypad arm changed from 90 to 240, Auto arm (Response) changed from 91 to 241, CMS from 94 to 244, SMS from 95 to 245, UCM Ids 17 to 24. When Cbus or KNX UCM etc arm system without code, the event log will record UCM ID 17 to 24. Key arm by action 72 is recorded as User Key Arm, Action 71 Auto arm is recorded as User Response. There is incompatibiliy between events recorded by old firmware due to user number changes. Before upgrade, read event log and save. A new eventlog.cfgx file is needed.
- Eventlog announces ID 17 to 95 for Ids when arm and disarm without code eg User Number 18 for UCM 2.
- SMS Format change from 2 to 3 digits for User, ID or Zone Number
- Supports 96 Inputs and Outputs. Slaves which are on ID 4 and 5 require SEM firmware 6.007
- Changed SMS Text message. Arm by Cbus , KNX etc without code reports User UCM ID number instead of \"User Keypad\" eg \"(identificatiuon text) -19 System Armed-018 UCM #2\" if armed by UCM#2 KNX. Before, Arm by KNX is shown as \"XXXX-AA-90 Keypad\" so it may appear (wrongly) as armed by keypad.
- GSM SMS Text message sends Alarm Type Number before alarm name and Zone/ID/User Number before its name eg \"Home Comfort - 01 Intruder Alarm - 007 Back Door\"
- juwi_uk - 12-10-2011
Do you have an updated comfort protocol guide yet that details these changes?
- ident - 12-10-2011
These mostly do not affect the protocol, except where the user numbers for engineer, keypad etc are involved. This is being amended
- Ingo - 12-12-2011
Testing with the Client and pressing the \'Panic\' button all seems to work fine up to the point where you want to disarm. The Alarm is canceled but the Client doesn\'t receive an AL command.
Ingo
- ident - 12-13-2011
You are correct. There is a bug in 6.009 where disarming from an alarm when in Security off leave the alarm in Alarm State. ULT 6.010 (beta) fixes this problem.
- Ingo - 12-13-2011
Still doesn\'t work right...
- ident - 12-13-2011
How exactly?
- Ingo - 12-13-2011
This is 6.006
[07:52:16] < AM1511
[07:52:17] < KL02010000
[07:52:17] < AL0903
[07:52:19] < SM000140
[07:52:20] < SM000140
[07:52:34] > m!******
[07:52:34] < AM0D01
[07:52:36] < KL00010000
[07:52:36] < AL1400
[07:52:36] < AM0801
[07:52:36] < KL00010000
[07:52:36] < AL1100
[07:52:36] < MD0001
[07:52:38] < SM000040
[07:52:38] < KL00010000
[07:52:39] < SM000040
[07:52:39] < SM000140
[07:52:42] < SM000000
And here is 6.010 for the exact same sequence.
[07:54:45] < AM1514
[07:54:46] < KL02010000
[07:54:46] < AL0903
[07:54:48] < SM000140
[07:54:55] > m!******
[07:54:55] < MD0001
[07:54:57] < SM000040
[07:54:57] < KL00010000
[07:54:57] < SM000140
[07:55:00] < SM000000
- ident - 12-13-2011
You are correct, there is still a problem there. This will be fixed in the next beta
- ident - 12-19-2011
ULT 6.011 is attached which fixes that bug