+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Support (https://www.comfortforums.com/forum-2.html)
+--- Forum: Problems & Troubleshooting (https://www.comfortforums.com/forum-36.html)
+---- Forum: Keypad (https://www.comfortforums.com/forum-69.html)
+---- Thread: Replace KP01 (/thread-2368.html)
- mmca22gr - 07-24-2011
I have a fairly old Comfort system and my KP01 has died on me. It was accidently knocked off the wall and no longer works. Getting 12v to it OK, so I know it is not a cable issue.
Anyway, Can I replace with a KP02 or KP03?
I am using Outside 4.169 - is the KP02 a direct replacement and just swapped out?
Many thanks for your help in advance.
- ident - 07-24-2011
Kp02 is no longer available so kp03 is the best alternative
Kp04 may have compatibility issues with your firmware
- mmca22gr - 07-24-2011
Many thanks for the fast reply - I will order a KP03 today!
- hendy - 07-26-2011
Take note that there is a difference in the orientation of the Audio (Mic, Voice), RS485 (KA, KB) and Power (12V, COM) connectors between the KP01 and KP03.
The 3 connectors in KP01 (from left to right):
VOICE MIC KA KB 12V COM
whereas,
The 3 connectors in KP03 (from left to right):
MIC VOICE KB KA COM 12V
- mmca22gr - 07-26-2011
Thanks for the heads up on that!