Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

UCM/KNX 5.234
 Moderated by: slychiu
 New Topic   Reply   Printer Friendly 
 Rate Topic 
 Posted: Friday Jun 10th, 2011 12:11 pm
   PM  Quote  Reply 
1st Post

Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3497

  back to top

The new UCM/KNX Firmware 5.234 can  be downloaded from
A new UCM/KNX manual is also available from

Known Issues
  1. KNX relative dim levels are wrong when SCALE switch is shunted
  2. KNX Floating point EIS5 calculation wrong

Bugs Fixed
  1. When zones are bypassed from Comfort, the mapped KNX group address is not updated with the bypass state
Note that Comfigurator 3.2.9 allows the UCM/KNX Physical address to specify Area 0 (previously areas 1 to 15 only), Line 0 (previously 1 to 15 only) and Address 1 to 255 (previously 1 to 200). This is not a firmware function

Last edited on Saturday Dec 31st, 2011 03:21 am by ident

 Current time is 04:35 pm

UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems