Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Comfort Zone status UnKnown
 Moderated by: admin
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Friday Apr 25th, 2014 10:35 pm
   PM  Quote  Reply 
1st Post
Luis Oliveira
Member
 

Joined: Friday Apr 25th, 2014
Location:  
Posts: 4
Status: 
Offline

  back to top

Hello,
A have a comfort with 5 slaves and after the installation of the slave nº 5 I got from the last 9 zones the state Unknown. If I cross one of these sensors it comes active and later inactive. If I connect again it comes Unknown again. On the Iphone and Ipad app this zones came with green light. If I have one intrusion I cannot know were the intruder is if he is on one of these zones.
Where are some images about this problem and about the modules that I have.
 
Another question is why the configurator V3.8.6 doesn't identify the serial numbers of the modules and one is invalid.
Regards
Luis

Attachment: Cytech Zones Unknown.zip (Downloaded 2 times)



 Posted: Saturday Apr 26th, 2014 06:54 am
   PM  Quote  Reply 
2nd Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

It may be an issue of comfigurator not identifying the state of these zones when you first connect.  To capture this can you start comfigurator before connecting, then connect, and Copy to Clipboard on the UCM/I/O monitor and show the copied information


However the zones should not be having any problem in reporting. If you press F32 ion the keypad for Security Check walk through the zones and see if the keypad announces the zones correctly.


I dont understand what you mean about the iphone and ipad zones. Do the zones show correctly on and off?

The serial numbers may not be recorded on these modules as this is a relatively new feature, especially if the firmware has been upgraded. It has no effect on the performance



 Posted: Saturday Apr 26th, 2014 01:13 pm
   PM  Quote  Reply 
3rd Post
Luis Oliveira
Member
 

Joined: Friday Apr 25th, 2014
Location:  
Posts: 4
Status: 
Offline

  back to top

I have done the copy of UCM I/O monitor and together I send a photo from the iphone issue, the same problema on the WizComfort and a new printscreen of configurator with all the 9 zones Unknown again.
On the Ipad is the same of the iphone all this zones are in green light and not in red like it should be. If we pass near the sensor with the iphone connected it cames after some seconds red like the other ones.

Attachment: Cytech Zones Unknown 2.zip (Downloaded 2 times)

Last edited on Saturday Apr 26th, 2014 01:14 pm by Luis Oliveira



 Posted: Sunday Apr 27th, 2014 08:26 am
   PM  Quote  Reply 
4th Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

Hi
we have traced the problem to the Comfort firmware which updates the zones up to 80 at reset using the Z? message, instead of 96. However updating of the zones is correct. The next Comfort firmware will fix that



 Posted: Sunday Apr 27th, 2014 02:22 pm
   PM  Quote  Reply 
5th Post
Luis Oliveira
Member
 

Joined: Friday Apr 25th, 2014
Location:  
Posts: 4
Status: 
Offline

  back to top

Thanks,
I am going to wait for new firmware version.



 Posted: Saturday May 3rd, 2014 06:54 am
   PM  Quote  Reply 
6th Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

The firmware ULT 7.056 (Beta) fixes the problem with 80 zones updated at reset
with U:T 7.056, 96 zones should be updated atreset



 Posted: Saturday May 3rd, 2014 12:52 pm
   PM  Quote  Reply 
7th Post
Luis Oliveira
Member
 

Joined: Friday Apr 25th, 2014
Location:  
Posts: 4
Status: 
Offline

  back to top

Thanks the problema is now solved in all devices.



 Current time is 11:14 pm
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems