i had a request from a client to make one channel of KNX universal module triggering 6 sequence lighting mode, i need to share it with whom interest or who have a previous experience with that type of operation. first i made the channel properties of knx module to send "1" value only then connect it to a counter at configrator, then i wrote the following response using counter70 for sequence operation:
Increment Counter0070
If Counter Counter0070 = 1 Then
Do HosamMode1
Else
If Counter Counter0070 = 2 Then
Do HosamMode2
Else
If Counter Counter0070 = 3 Then
Do HosamMode3
Else
If Counter Counter0070 = 4 Then
Do HosamMode4
Else
If Counter Counter0070 = 5 Then
Do HosamAllON
Else
If Counter Counter0070 = 6 Then
Do HosamAllOFF
Set Counter0070 = 0
End If
End If
End If
End If
End If
End If
appreciate your contribution thanxLast edited on Friday Feb 3rd, 2012 12:19 pm by WMADKOUR
|